Settings for USB Device Router:
 


To create a preset for Hamscope, click Preset | Save as.


Rig Control Setup:


 
COM Port should be the same as is assigned for Radio Control in Router.  
Rig Baud must match your radio's requirements. 
 
PTT Control Setup:
 


COM Port should be the same as was assigned for PTT and CW in Router.   
PTT should be RTS;  CW should be DTR;  do not check "Unused Pins High"   

Hamscope does not support WinKey.  However, the keyer can be used in parallel with the Hamscope generate CW.