Settings for USB Device Router:
 


 
To create a Preset for Logger32, click on Menu | Preset | Save As. 
 
 
Settings for Logger32:

Radio Setup  

The Radio port should be same as assigned in Router-Ports tab for Control.   Baud rate is determined by the radio requirements.    RTS/DTR should not be checked     PTT will be set in both the Soundcard Data Window.

 
 
CW & WinKey Setup  

The Serial port should be same as assigned in Router for WinKey.   PTT may be enabled or not by personal preference.    Key on pin 3 must be selected     All other settings are "operator preference."