Settings for USB Device Router:
 


To create a preset for SwissLog, click Preset | Save as.


Transceiver Control Setup:


 
COM Port should be the same as is assigned for Radio Control in Router.  
Rig Baud must match your radio's requirements.  
Keep the polling imterval to at least 1/2 second - (5 or more). 
 
CW Keyer and PTT port:
 
SwissLog does not directly support a CW or Digital Mode (PSK/RTTY/etc.) application but
SwissLog will cooperate with Hamscope for CW operation.  Router's PTT and CW
settings are set to COM5 for use by Hamscope.  If you chose to use Hamscope for
CW, you may prefer to use Hamscope for Rig Control and use DDE functions to update
SwissLog.

In that case, check the HamScope templates. 

SwissLog does not support WinKey.  However, the keyer can be used in parallel with the
CW output from HamScope.