Settings for USB Device Router:
 

 
Audio tab:
Follow radio selection is recommended.  
If Router does not support your radio use Fixed settings with appropriated mode  settings. 

PTT/FSK:
Follow radio selection is recommended. 
If Router does not support your radio use Fixed settings with appropriated mode  settings.
 
To create Preset for Log-EQF, click on Preset | Save as.
 
Settings for Win-EQF:
 

 
To set up a rig, select Setup | Station #1 | Rig | Model: 
Then select your rig from the list provided and step through the COM Port and communication parameters.  
The port should match the Control Port selected in Router 
Baud, Data bits, Stop bits and Parity should be those required by your radio. 


 
To set up WinKey, select Setup | Station #1 | CW Keyer | Keyer Choices: 
Then select WinKey from the choices provided and Select a COM Port.   
The port should match the WinKey Port defined in Router