Settings for USB Device Router:
Audio tab:
Follow radio is recommended.
If Router does not support your radio use the Fixed settings appropriate to your primary operating mode.
PTT/FSK tab:
Follow radio is recommended.
If Router does not support your radio use the Fixed settings appropriate to your primary operating mode.
To create a Preset for Logger32, click on Menu | Preset | Save As.
Settings for Logger32:
Radio Setup
 |
The Radio port should be same as assigned for Control in Router. Baud rate is determined by the radio requirements. RTS/DTR should not be checked PTT will be set in both the Soundcard Data Window and DVK Window. |
CW & WinKey Setup
 |
The Serial port should be same as assigned to WinKey in Router. PTT May be enabled or not by personal preference. Key on pin 3 must be selected All other settings are "operator preference." |
PTT and FSK Configuration
 |
 |
|
Both PTT Windows should specify: "PTT by Serial Port" The Serial port should be the port assigned for FSK and PTT in Router This port will be used for FSK in MMTTY DO NOT check "MMTTY FSK on USB Port |
Configuring MMTTY for FSK
 |
|
 |
To use FSK in MMTTY select either: Sound + COM-TxD (FSK) -or- COM-TXD (FSK) on the Misc tab in the MMTTY configuration. Then click the "USB Port" button and select "C: Limiting speed" as the Processing method. |