Settings for USB Device Router:
 


Audio tab:
Follow radio is recommended.
If Router does not support your radio use the Fixed settings appropriate to your primary operating mode.
 
PTT/FSK tab:
Follow radio is recommended.
If Router does not support your radio use the Fixed settings appropriate to your primary operating mode.
 
To create a preset for SD, click Preset | Save as.
 
 
SD CW & Transceiver Control Setup:
 
SD is entirely configured by commands:   
   To configure SD, type PORTS <enter>  
    Radio 1 CW Port should be COM5  
    Radio 2 CW Port should be 0 (unless you have a second USB II for a second radio)       
    Radio 1 Control Port should be COM4
    Radio 2 Control Port should be 0 (unless you have a second USB II for the second radio)
    The "Radio 1 Name" should be the SD control file for your radio.    
      
    To enable WinKey, type WINKEY <enter>        
    To configure WinKey to your preferences, refer to SDHELP.TXT in your SD directory.