Settings for USB Device Router:
 


To create a preset for SwissLog, click Preset | Save as.
 
 
Transceiver Control Setup:


 
COM Port should be the same as is assigned for Radio Control in Router.  
Rig Baud must match your radio's requirements.  
Keep the polling imterval to at least 1/2 second - (5 or more). 
 
microKEYER and PTT port:
 
SwissLog does not directly support CW or Digital Mode (PSK/RTTY/etc.) applications but will    
cooperate with Hamscope for CW and digital operation.  Router's PTT and CW settings are set
to COM5 for use by Hamscope.  If you chose to use Hamscope for CW, PSK, RTTY and MFSK.
you may prefer to use Hamscope for Rig Control and use Hamscope's DDE functions to update
SwissLog.

In that case, see the HamScope template.