Settings for USB Device Router:
 


To create a preset for SwissLog, click Preset | Save as.
 
 
Transceiver Control Setup:


 
COM Port should be the same as is assigned for Radio Control in Router.  
Rig Baud must match your radio's requirements.  
Keep the polling imterval to at least 1/2 second - (5 or more). 
 
USB Interface II and PTT port:
 
SwissLog does not directly support CW or Digital Mode (PSK/RTTY/etc.) applications but      
SwissLog will cooperate with Hamscope for CW and digital operation.  Router's PTT and
CW settings are set to COM5 for use by Hamscope.  If you chose to use Hamscope for
CW, PSK, RTTY and MFSK you may prefer to use Hamscope for Rig Control and use DDE 
to update SwissLog.

In that case, check the HamScope templates.