mkii_new_knobs
USB micro KEYER II

The culmination of microHAM's world expertise in high performance, all-in-one USB interfaces.


Click here to read Radcom 01/2008 review   
Copyright 2008 RSGB. All rights reserved.
For personal use only. Used here with permission.
Click here to read or write your own review at eHAM.net   eHam.net


Seven micro KEYER II units was successfully used at records breaking VP6DX DXPedition.

   "Each operating position included a microHAM micro KEYER II between the transceiver and the logging computer. Not only did the micro KEYER II provide flawless CW and RTTY FSK keying, it also sequenced the transition between receive and transmit. By correctly managing receive antenna pre-amp DC power, the transmitter power amplifier key line, the transceiver PTT, and CW/FSK keying, the micro KEYER II helped protect the pre-amps and kept transmitted signals free of transients. The computers recorded audio archives via the micro KEYER's high quality USB audio codecs."

    micro KEYER II™ is the most powerful single radio All-In-One USB interface and the only USB interface to fully support voice operation including microphone switching. With an single USB port, microKEYER II™ works with any Windows-based logging or control program for CW, voice, FSK and digital (RTTY, PSK31, SSTV, OLIVIA, MFSK, WSJT, etc.) operation. micro KEYER II™ includes a radio control interface that supports all standards (RS-232,
CI-V, Kenwood and Yaesu TTL), a powerful CW memory keyer using K1EL's WinKey, a Digital Voice Keyer, two channel audio for transceivers with dual receivers, automatic microphone selection, and a buffer/sequencer for amplifier or LNA control.

!

micro KEYER II

Package contains: 
micro KEYER II, CDROM with drivers and control software, USB A-B cable 2m (6.5ft) long, and RJ45 to Foster 8 male microphone adapter.

iLINK - SteppIR

Cable connects MKII iLINK port and SteppIR native control DATA OUT port.

iLINK - UltraBeam

Cable connects MKII iLINK port and UltraBeam native control RS-232 port.

Additional Radio Cables

DB37-EL-K23

For Elecraft's Transceiver:
K2/100, K3 (uses front MIC jack)

DB37-EL-K3R

For Elecraft's Transceiver:
K3 (uses rear MIC jack)

DB37-IC-8

For ICOM's Transceivers: 
IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746, IC-746Pro, IC-7400, IC-756/Pro/ProII/ProIII, IC-7600, IC-761,
IC-765, IC-775, IC-781, IC-910, IC-7700

DB37-IC-7800

For ICOM's Transceivers: 
IC-7800, IC-7850/51

DB37-IC-13

For ICOM's Transceivers:
IC-703, IC-706, IC-706mkII, IC-706mkIIG, IC-7000, IC-7100

DB37-IC-599

For ICOM's Transceivers with original Icom OPC-599 adapter:
IC-703, IC-706, IC-706mkII, IC-706mkIIG, IC-7000

DB37-IC-718

For ICOM's Transceivers:
IC-78, IC-718, IC-7200, IC-7300, IC-7410, IC-9100

DB37-IC-RS8

For ICOM's Transceivers: 
IC-707, IC-725, IC-726, IC-728, IC-729, IC-735, IC-736, IC-737, IC-738, IC-746, IC-746Pro, IC-7400, IC-756, IC-756Pro, IC-756ProII,
IC-756ProIII, IC-761, IC-765, IC-775, IC-7700, IC-7800, IC-781, IC-910

Designed for use together with micro BAND DECODER

DB37-JST-245

For JRC Transceiver:
JST-245

DB37-TS-6

For KENWOOD's Transceivers:
TS-140, TS-440, TS-450, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-940, TS-950

TS-140 , TS-680 - requires Kenwood IF-10C
TS-711 , TS-811 - requires Kenwood IF-10A
TS-940 - requires Kenwood IF-10B

DB37-TS-9

For KENWOOD's Transceivers:
TS-570S, TS-570D, TS-590, TS-870, TS-870S, TS-2000, TS-2000X, TS-B2000

DB37-TS-9M

For KENWOOD's Transceivers:
TS-570S, TS-570D, TS-870, TS-870S, TS-2000,
TS-2000X, TS-B2000,
TS-140, TS-440, TS-450, TS-680, TS-690, TS-711, TS-790, TS-811, TS-850, TS-940, TS-950

Designed for use together with micro BAND DECODER or PIEXX Interface

DB37-TS-990

For KENWOOD's Transceivers:
TS-990S

DB37-TS-MINI6

For KENWOOD's Transceivers:
TS-480HX, TS-480SAT

DB37-TT-JPA

Set consist :
DB37-TT-OM7 cable and RJ45 to Foster 4 male adapter.

For TEN TEC's Transceivers:
TT-Jupiter, TT-Pegasus, TT-Argonaut V

DB37-TT-OM

Set consist :
DB37-TT-OM cable and RJ45 to Foster 4 male adapter.

For TEN TEC's Transceiver:
TT-Omni VI, Omni VI+

DB37-TT-OMV

Set consist :
DB37-TT-OMV cable and RJ45 to Foster 4 male adapter.

For TEN TEC's Transceiver:
TT-Omni V

DB37-TT-OM7

For TEN TEC's Transceiver:
TT-Omni VII

DB37-TT-OR

Set consist :
DB37-TT-OR cable and RJ45 to Foster 4 male adapter.

For TEN TEC's Transceiver:
TT-Orion

DB37-TT-OR2

For TEN TEC's Transceiver:
TT-Orion II

DB37-FT-MINI8

For YAESU's Transceivers:
FT-817, FT-857, FT-857D, FT-897, FT-897D

DB37-FT-450

For YAESU's Transceivers:
FT-450, FT-991

DB37-FT-767

For YAESU's Transceiver:
FT-767

DB37-FT-840

For YAESU's Transceiver:
FT-840

DB37-FT-847

For YAESU's Transceiver:
FT-847

DB37-FT-757

For YAESU's Transceiver:
FT-757GXII

DB37-FT-767

For YAESU's Transceiver:
FT-767

DB37-FT-890

For YAESU's Transceiver:
FT-890

DB37-FT-900

For YAESU's Transceivers:
FT-900

DB37-FT-920

For YAESU's Transceiver:
FT-920

DB37-FT-950

For YAESU's Transceivers:
FT-950, FTDX-1200, FTDX-3000

DB37-FT-990

For YAESU's Transceiver:
FT-990

FT-990 must have ROM v1.3

DB37-FT-1000D

For YAESU's Transceivers:
FT-1000, FT-1000D

FT-1000 and FT1000D must have ROM v6.0

DB37-FT-1000MP

For YAESU's Transceivers:
FT-1000MP, FT-1000MPmkV, FT-1000MPmkVField

DB37-FT-2000

For YAESU's Transceivers:
FT-2000, FT-2000D, FTDX-5000, FTDX-5000D, FTDX-5000MP

DB37-FT-9000

For YAESU's Transceivers:
FTDX-9000D, FTDX-9000MP, FTDX-9000C

DB37-FX-5000

For Flex Transceivers:
FX-5000A/C

DB37-PT-8000

For Hilberling Transceivers:
PT-8000A