Band Decoder
|
Transceiver connections
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with COM keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with LPT keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with DSP 100 signal processor unit ( required RTS/CTS handshaking )
Setting and connecting of micro Band Decoder + Kenwood rigs with RS232 interface:
TS 570, 870, 2000 with COM keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with RS232 interface:
TS 570, 870, 2000 with LPT keying logging software.
Setting and connection of micro Band Decoder + Icom rigs with CI-V interface and COM port keying logging software. Supports all Icom HF model.
Setting and connection of micro Band Decoder + Icom rigs with CI-V interface and LPT port keying logging software. Supports all Icom HF model.
Setting and connection of micro Band Decoder + Yaesu rigs with DIN8 BAND DATA connector:
FT 920, 990, 1000, 1000D, 1000MP, 1000MPmkV, 1000MPmkVField, 2000, 2000D, 9000
This connection make use of 4 bit band data info from rig. Support COM port keying logging software.
Setting and connection of micro Band Decoder + Yaesu rigs with RS232 interface:
FT 1000MP, 1000MPmkV, 1000MPmkVField, 2000, 2000D, 9000
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connections of micro Band Decoder + Yaesu rig DIN6 CAT with FIF232 interface:
FT 980, 990, 1000, 1000D.
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connection of micro Band Decoder + Yaesu rigs with MINIDIN8 BAND DATA connector:
FT 100, 100D, 817, 857, 897, 900
This connection make use of 4 bit band data info from logging software from LPT port. Support COM port keying logging software.
Setting and connections of micro Band Decoder + Yaesu rigs with FIF232 interface:
FT 100, 100D, 817, 840, 857, 897
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connections of micro Band Decoder + PC-LPT for general connection in stations with not supported rig or old radio model without computer interface. This connection make use of 4 bit band data info from logging software from LPT port. Support COM and LPT port keying.
Comparison of Parallel vs. Serial Band Decoding.
Power amplifier connections
1. Setting and connection of micro Band Decoder + Yaesu PA with 4 bit band data info:
FL-7000, VL-1000 and Antenna Switch.
2. Setting and connection of micro Band Decoder + ICOM PA with CI-V band data info:
IC-PW1 and Antenna Switch.
3. Setting and connection of micro Band Decoder + old ICOM PA with analog 0-8V band data info:
IC-2KL, IC-4KL and Antenna Switch.
Accessories connections
Installation of optional
relay board into micro Band Decoder.
Setting and connections of
micro Band Decoder + W5XD MK-1100 multi keyer™
Switching between two antennas
Example of automatic/manual antenna switching inside the band
Compatible Antenna Switches connections
Setting and connection of
micro Band Decoder + Ameritron RCS8™
Setting and connection of
micro Band Decoder + Ameritron RCS10™
Setting and connection of
micro Band Decoder + Top Ten Devices 6 way™
Setting and connection of
micro Band Decoder + WX0B Rat Pack™
Setting and connection of
micro Band Decoder + WX0B Six Pack™
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with COM keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with LPT keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with IF232 interface:
TS 450, 690, 850, 950 with DSP 100 signal processor unit ( required RTS/CTS handshaking )
Setting and connecting of micro Band Decoder + Kenwood rigs with RS232 interface:
TS 570, 870, 2000 with COM keying logging software.
Setting and connecting of micro Band Decoder + Kenwood rigs with RS232 interface:
TS 570, 870, 2000 with LPT keying logging software.
Setting and connection of micro Band Decoder + Icom rigs with CI-V interface and COM port keying logging software. Supports all Icom HF model.
Setting and connection of micro Band Decoder + Icom rigs with CI-V interface and LPT port keying logging software. Supports all Icom HF model.
Setting and connection of micro Band Decoder + Yaesu rigs with DIN8 BAND DATA connector:
FT 920, 990, 1000, 1000D, 1000MP, 1000MPmkV, 1000MPmkVField, 2000, 2000D, 9000
This connection make use of 4 bit band data info from rig. Support COM port keying logging software.
Setting and connection of micro Band Decoder + Yaesu rigs with RS232 interface:
FT 1000MP, 1000MPmkV, 1000MPmkVField, 2000, 2000D, 9000
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connections of micro Band Decoder + Yaesu rig DIN6 CAT with FIF232 interface:
FT 980, 990, 1000, 1000D.
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connection of micro Band Decoder + Yaesu rigs with MINIDIN8 BAND DATA connector:
FT 100, 100D, 817, 857, 897, 900
This connection make use of 4 bit band data info from logging software from LPT port. Support COM port keying logging software.
Setting and connections of micro Band Decoder + Yaesu rigs with FIF232 interface:
FT 100, 100D, 817, 840, 857, 897
This connection make use of CAT band data info from rig. Support COM or LPT port keying logging software.
Setting and connections of micro Band Decoder + PC-LPT for general connection in stations with not supported rig or old radio model without computer interface. This connection make use of 4 bit band data info from logging software from LPT port. Support COM and LPT port keying.
Comparison of Parallel vs. Serial Band Decoding.
Power amplifier connections
1. Setting and connection of micro Band Decoder + Yaesu PA with 4 bit band data info:
FL-7000, VL-1000 and Antenna Switch.
2. Setting and connection of micro Band Decoder + ICOM PA with CI-V band data info:
IC-PW1 and Antenna Switch.
3. Setting and connection of micro Band Decoder + old ICOM PA with analog 0-8V band data info:
IC-2KL, IC-4KL and Antenna Switch.
Accessories connections
Installation of optional
relay board into micro Band Decoder.
Setting and connections of
micro Band Decoder + W5XD MK-1100 multi keyer™
Switching between two antennas
Example of automatic/manual antenna switching inside the band
Compatible Antenna Switches connections
Setting and connection of
micro Band Decoder + Ameritron RCS8™
Setting and connection of
micro Band Decoder + Ameritron RCS10™
Setting and connection of
micro Band Decoder + Top Ten Devices 6 way™
Setting and connection of
micro Band Decoder + WX0B Rat Pack™
Setting and connection of
micro Band Decoder + WX0B Six Pack™
