; dk2, firmware for DIGI KEYER II (DK2), change log
; by Martin Bujdak, microHAM
--------------------------------------------------------------------------------

v3.14, released 201008
  - IC-9700 and IC-9700(SAT) was merged.
v3.13, released 200817
  - IC-9700 (SAT) added to the list
v3.12, released 191110
  - bug fixed: Responses to commands MD0 and MD1 from FTdx101D was interpreted
    incorrectly.
v3.11, released 190610
  - IC-9700 and FTdx101D added to the list
v3.10, released 190301
  - TS-890 added to the list
v3.9, released 180809
  - pttOutActive added to PTT Monitor
v3.8, released 180103
  - IC-7610, IC-821H added to the list
v3.7, released 161212
  - some SDRs added to the list:
    - Flex 6000 series (uses TS-990 protocol)
    - Flex 5000 (uses TS-2000 protocol)
    - Apache Labs ANAN 100/200 (uses TS-2000 protocol)
v3.6, released 161104
  - bug fixed: Automatically reported operating frequency was ignored
      on Icoms with new firmware (when CI-V transceive was set to on):
      IC-7100(fw v1.10(E4)+), IC-7300, IC-7600(fw v2.00+), IC-7700(fw v2.10+),
      IC-7800(fw v3.10+), IC-7850, IC-7851
v3.5, released 160920
  - Expert Electronics MB1 added to the list
v3.4, released 160419
  - support for newer firmware versions of some ICOMs:
      Icom IC-7100, fw v1.10(E4)+
      Icom IC-7600, fw v2.00+
      Icom IC-7700, fw v2.10+
v3.3, released 160415
  - FT-991, IC-7850, IC-7851, IC-7800 fw v3.10+, IC-7300 added to the list
  - fixed FT-900, FT-890, FT-840
  - Added possibility to set software PTT and software lock from router.
v3.2, released 140114
  - Hilberling PT8000 added to the list
  - Elecraft K3 protocol updated to Rev.E11 and extended by P3 protocol Rev.A4
  - optional AZERTY keyboard layout
v3.1, released 131204
  - new optional feature FSK stuffing: Gaps in FSK stream from computer are
    adaptively filled with letter or figure shifts to achieve continuous stream.
v3.0, released 131022
  - Now FSK can be generated at 45.45 Bd instead of aproximate 45 Bd.
  - FTdx1200 added to the list
v2.4, released 130812
  - IC-7100 added to list
v2.3, released 130506
  - bug fixed: commands SB,DV was mistakenly included to K2 protocol
v2.2, released 130416
  - FTdx3000 and TS-990 added to the list
  - Support to PTT monitor
v2.1, released 120217
  - bug fixed: "Restore serial CW" didn't work in QSK and Semi Break-In modes.
v2.0, released 120125
  - PTT lead can be applied in two different ways:
     (1) PTT is delayed to PA/LNA PTT
     (2) PTT is started simultaneously with PA/LNA PTT and CW is delayed
    Up to this version the second case was used only when PTT was initiated by
    WinKey or serial CW. In all other cases (like foot switch, serial PTT,
    WK command PTT ...) the first way was used.
    Since this version it is performed consistently with the current mode.
    The second case is used in CW mode and the first case in all other modes
    regardless of what initiates PTT.
  - bug fixed: When "CW in VOICE" was enabled serial CW generated PTT also in
    VOICE mode. Now consistently both serial CW and WinKey CW generates PTT
    only in CW mode. They don't generate PTT in VOICE at all.
v1.8, released 120118
  - Optionally WinKey can generate CW immediately after paddle is hit. In this
    case PA/LNA PTT lead must be provided by footswitch or other PTT source.
  - WinKey parameters "Keying compensation" and "1st extension" are controlled
    automatically now.
    In the QSK mode the keying compensation and in the Semi Break-In mode
    the 1st extension are utilized to take account of new parameter T/R delay.
v1.7, released 111215
  - minor bug fixed: now keyer follows decoded mode regardless if it is valid
    or timeouted
v1.6, released 110809
  - bug fixed: Answer to IF command in Kenwood protocol was incorrectly
    interpreted when PTT and split was active.
v1.5, released 110714
  - minor bug in Elecraft K3 CAT parser fixed
  - Support for Elecraft K3 subreceiver (also with respect to diversity mode)
v1.4, released 110301
  - IC-9100, IC-7410 and TS 590 added to list
v1.3, released 101111
  - "Elecraft K3 (patched 2)" added to list
v1.2, released 100922
  - Support to MMVARI FSK sending in RTTY mode added
v1.1, released 100816
  - minor internal change
v1.0, released 100616
  - First release of DK2 firmware.