; smd, firmware for STATION MASTER DELUXE (SMD), change log
; by Jan Waclawek, microHAM
--------------------------------------------------------------------------------


v1.35, released 191111
  - bug fixed: Responses to commands MD0 and MD1 from FTdx101D was interpreted
    incorrectly.
v1.34, released 190610
  - IC-9700 and FTdx101D added to the list
v1.33, released 190301
  - TS-890 added to the list
v1.32, released 190218
  - improved stability of communication between PC and SMD (config update)
v1.31, released 181119
  - non-Rx-safe Tx antennas included in same band protection mechanism
  - upon Rx/SubRx takeover suggestion, same/different button is now automatic Yes/No
  - fixed false conflicts of subRx path with Rx/Tx path of the same SMD
    in complex setups (together with module_relay v1.19)
v1.29, released 180302
  - support for locally connected rotator together with networked rotators in stack
v1.28, released 180104
  - IC-7610, IC-821H added to the list
  - automatic focus change upon PTT can be disabled
    - see new menu item [m3]PTT Focus
  - if PTT starts while rotator is being set, rotator setting is immediately applied
  - if no rotator in current focus, rotators from other focus may be controlled
    - related menu item [m4]Other Rota added
v1.27, released 170309
  - bug fixed: Control of SteppIR(SDA100,10/20kHz) didn't work
v1.26, released 170302
  - SteppIR and UltraBeam devices (now collectively referred as MotorANT devices)
    are now categorized by range and type instead of model name.
  - support for UltraBeam RCU-06
  - tuning of UltraBeam initiated at 10kHz boundaries
  - tuning of SteppIR with SDA 100 controller initiated at 50kHz boundaries and
    optionally at 10kHz or 20kHz boundaries (band dependent)
v1.25, released 161212
  - some SDRs added to the list:
    - Flex 6000 series (uses TS-990 protocol)
    - Flex 5000 (uses TS-2000 protocol)
    - Apache Labs ANAN 100/200 (uses TS-2000 protocol)
  - Now PTT is not locked when TX frequency is out of SteppIR range upon startup
v1.24, released 161107
  - current rotator azimuth displayed when encoder only pressed
    (while retaining the previous functionality of all rotators stop)
v1.23, released 161103
  - bug fixed: Automatically reported operating frequency was ignored
      on Icoms with new firmware (when CI-V transceive was set to on):
      IC-7100(fw v1.10(E4)+), IC-7300, IC-7600(fw v2.00+), IC-7700(fw v2.10+),
      IC-7800(fw v3.10+), IC-7850, IC-7851
v1.22, released 161004
  - Expert Electronics MB1 added to the list
v1.21, released 160912
  - improved rotator(v1.8)/data rotator(v1.21) azimuth reporting upon startup
  - ANT unit in module_relay(v1.17) now obey frequency-band rules
  - improved ANT unit handling for manual control from SMD properties
v1.20, released 160419
  - support for newer firmware versions of some ICOMs:
      Icom IC-7100, fw v1.10(E4)+
      Icom IC-7600, fw v2.00+
      Icom IC-7700, fw v2.10+
v1.19, released 160415
  - iLink coupling to SMORF
  - possibility to set software lock from router
  - FT-991, IC-7850, IC-7851, IC-7800 fw v3.10+, IC-7300 added to the list
  - fixed FT-900, FT-890, FT-840
v1.17, released 140114
  - Hilberling PT8000 added to the list
  - Elecraft K3 protocol updated to Rev.E11 and extended by P3 protocol Rev.A4
v1.16, released 131204
  - FTdx1200 added to list
v1.15, released 130815
  - IC-7100 added to list
v1.14, released 130808
  - support for Acom 2S1 now includes bandlock/contest protection
    (with module_data v1.17)
  - improved path properties handling
  - improved nonsplit-to-split switching
  - temperature in Bratislava hit record with 39C today
v1.13, released 130724
  - enhanced support for Acom 2S1 boxes (with module_data v1.16)
  - implemented persistent path properties
  - implemented displaying boxes causing BUSY when PTT
  - increased EEPROM configuration space
  - fixed problem when after subRx-split switched on, a frequency change was needed
  - minor fixes for subRx items display
v1.12, released 130711
  - fixed problem with paths containing multiple PAs
  - added support for Acom 2S1 boxes (with module_data v1.15)
v1.11, released 130614
  - enhanced display of azimuths for certain types of stacks
v1.10, released 130513
  - adopted UltraBeam v1.36 protocol change
v1.9, released 130506
  - bug fixed: commands SB,DV was mistakenly included to K2 protocol
  - bug fixed: SteppIR/SDA100 Remote Driver bit treated as "HAM mode"
v1.8, released 130417
  - added contest rule
  - improved same-band protection in conjunction with Keyers
  - added new radios to CAT, see Keyers changelog
v1.7, released 120911
  - added support for new UltraBeam models
v1.6, released 120806
  - updated control commands protocol
v1.5, released 120727
  - control commands protocol extensions implemented
  - added delays in Acom2000 communication protocol (confirmed with manufacturer)
v1.4, released 120418
  - fixed minor bug for switching between bands on the same multiband path
    while in non-split and same-band protection is not no-protection
v1.3, released 120214
  - SteppIR/UltraBeam front panel settings for 180/bidir are retained
  - for UltraBeam, tuning step changed to 25kHz
v1.2, released 120118
  - improved handling of SDA100
  - modified behaviour of bandlock to protect also receivers out of bandlock bands
v1.1, released 110826
  - improved startup sequence of slave processors
v1.0, released 110809
  - First release of SMD firmware.